Frequently Asked Questions
Fayetteville, North Carolina, is covered by area codes 910 and 472. Area code 910 was originally established in 1993, while 472 was added as an overlay in 2022 due to increased demand for phone numbers.
Fayetteville has two area codes, 910 and 472, because of the region's growth and the subsequent need for more phone numbers. Area code 472 was implemented as an overlay to 910 in late 2022 to accommodate this growth.
To dial a number in area code 910, you must use 10-digit dialing, including the area code and the seven-digit local number. This applies even for local calls within the 910 area code itself.
Area code 472 is an overlay for area code 910 in southeastern North Carolina. It was introduced in October 2022 to address the increasing demand for phone numbers in the region, which includes cities like Fayetteville, Wilmington, and Jacksonville.
You should always use 10-digit dialing (area code + number) for all calls within the 910/472 area code region. This became mandatory with the implementation of the 472 overlay and the national 988 Suicide Prevention Lifeline.
Area code 910, along with its overlay 472, serves southeastern North Carolina. Major cities in this area include Fayetteville, Wilmington, Jacksonville, and Lumberton. The area code covers both urban and rural communities in the region.
To call area code 910 or 472 from another area code, dial 1 + the 10-digit number (area code + local number). For operator-assisted calls, dial 0 + the 10-digit number.
Wilmington, North Carolina is covered by area codes 910 and 472. These area codes cover a large part of southeastern North Carolina and require 10-digit dialing for all calls.
Area codes 910 and 472 are jointly regulated by the North Carolina Utilities Commission (NCUC) and the Federal Communications Commission (FCC). The NCUC handles state-specific regulations, while the FCC oversees national telecommunications policy.
Originally, area code 910 covered a larger area. Due to rapid growth and increased phone usage, area code 336 was created in 1997 for the Piedmont Triad, leaving 910 to serve the southeastern region.
No, you cannot dial 7 digits in area code 910 or 472 anymore. 10-digit dialing (area code + local number) is mandatory for all calls within these area codes due to the implementation of the 472 overlay in 2022.
Area Code 910: Fayetteville, North Carolina
Area code 910 serves southeastern North Carolina, including major cities like Fayetteville, Wilmington, and Jacksonville. Introduced in 1993, the 910 area code covers 19 counties in the North American Numbering Plan (NANP) – the telephone numbering system that enables interoperable telecommunications services across the U.S., Canada, Bermuda, and most of the Caribbean. Area code 472 was added as an overlay in 2022 to serve the same geographic region.
What is area code 910? The 910 area code is a telephone area code in North Carolina that covers the southeastern portion of the state. If you're searching for "where is area code 910" or "what cities are in 910 area code," this guide provides complete coverage details, location maps, dialing procedures, and how to get a 910 phone number. Whether you're a business establishing a local presence, a resident relocating to the region, or someone needing to contact services in southeastern North Carolina, understanding the 910 and 472 area codes is essential.
History and Evolution of Area Codes 910 and 472
The history of these area codes provides valuable context for their current usage. North Carolina established area code 910 on November 14, 1993, carving it out from area code 919 (Source: Wikipedia). This marked North Carolina's first new area code in 39 years, driven by rapidly increasing telephone usage from the proliferation of cell phones, pagers, and fax machines in the early 1990s.
It initially covered a fan-shaped region in the southeastern and north-central portions of the state, including parts of the Piedmont Triad (Greensboro, Winston-Salem, High Point), the Sandhills (Southern Pines, Aberdeen), and the southeastern coast (Wilmington, Fayetteville, Jacksonville), connected by a narrow geographic corridor.
Within only three years, area code 910 approached exhaustion due to continued rapid growth. On December 15, 1997, North Carolina created area code 336 for the Piedmont Triad and most of the old 910 territory's western portion (Source: Wikipedia). Normally, when an area code splits, the more populated portion keeps the original code. However, regulators chose to let the southeastern region keep 910 despite the Triad's larger population – a choice that prioritized continuity for the coastal and military communities (including Fort Bragg, now Fort Liberty, and Camp Lejeune).
In recent years, the southeastern region experienced another surge in demand for phone numbers. Area code 910 contained telephone numbers with the 988 exchange, which conflicted with the nationwide 988 Suicide & Crisis Lifeline the FCC established. To avoid conflicts when dialing the 3-digit 988 code, the FCC made 10-digit dialing mandatory on October 24, 2021 across all area codes with 988 exchanges (Source: FCC). This transition prepared the region for the 988 Lifeline launch on July 16, 2022, and eliminated the need for a permissive dialing period when area code 472 launched.
With a forecast that numbers would run out by 2023, North Carolina approved area code 472 as an overlay to 910, effective October 7, 2022 (Source: North Carolina Utilities Commission). An overlay means both area codes serve the same geographic area, and all local calls require 10-digit dialing regardless of which area code you call.
What Cities Are in Area Code 910? Complete Coverage Map
Where is area code 910 located? Area codes 910 and 472 cover southeastern North Carolina, serving a diverse range of communities. The 910 area code location includes bustling urban centers like Fayetteville (population 209,692) and Wilmington (population 118,578), military communities such as Jacksonville (population 73,507) near Camp Lejeune, and smaller cities like Lumberton (population 19,220) (Source: Data USA, 2023 Census estimates). The area spans coastal resort towns (Wrightsville Beach, Oak Island), agricultural communities, and military installations.
Counties in 910 Area Code: Area codes 910 and 472 serve 19 counties in southeastern North Carolina: Bladen, Brunswick, Columbus, Cumberland, Duplin, Harnett, Hoke, Lee, Montgomery, Moore, New Hanover, Onslow, Pender, Richmond, Robeson, Sampson, Scotland, and portions of Jones County (Source: NC Public Staff, 2014 map).
Here's a table summarizing the key cities with their 2023 populations and coordinates:
Geographic coordinates can be useful for GPS navigation, mapping applications, and understanding the region's geographic spread across approximately 150 miles of southeastern North Carolina.
This geographic diversity – encompassing coastal communities, the Sandhills region, urban centers, and rural farmland – makes understanding these area codes crucial for anyone interacting with the region's residents, businesses, or military installations.
How to Dial 910 Area Code Phone Numbers
How do you dial area code 910? With the implementation of the 472 overlay, you must dial 10 digits (area code + local number) for all calls within the 910/472 area. This applies even when calling a number with the same area code as your own. Learn the correct dialing procedures for North Carolina area codes for effective communication.
Dialing Examples:
Important Service Numbers:
Troubleshooting: If your call doesn't connect, verify you're using the full 10-digit number including area code. If you accidentally dial 988 as part of a local 7-digit number, you'll reach the Crisis Lifeline – hang up and redial with the area code. Reprogram older phone systems or fax machines set for 7-digit dialing to include area codes.
Regulatory Oversight: North Carolina Telecommunications Commission
The North Carolina Utilities Commission (NCUC) and the Federal Communications Commission (FCC) jointly regulate area codes 910 and 472. These regulatory bodies ensure fair and efficient telecommunications services, manage number allocation, oversee area code relief planning, and protect consumer rights.
What the NCUC does: The NCUC approves area code overlays and splits, ensures equitable access to phone numbers, resolves disputes between carriers and consumers, sets service quality standards for landline providers, and enforces state telecommunications regulations.
What matters to you: The NCUC regulates incumbent local exchange companies (ILECs, such as traditional phone companies like AT&T landline services), competing local providers (CLPs), interexchange long-distance carriers (IXCs), and payphone service providers (PSPs). However, they do not regulate cable providers (like Spectrum), satellite providers (like Verizon Wireless or T-Mobile), or internet service providers. Handle disputes with mobile carriers or internet providers through the FCC, not the NCUC.
File complaints: If you experience service issues with a regulated provider, file a complaint with the NCUC Consumer Services Division by calling 1-866-380-9816 (toll-free) or submit an online complaint. For wireless carriers or internet service issues, contact the FCC Consumer Complaint Center at 1-888-CALL-FCC (1-888-225-5322).
How to Get a 910 Area Code Phone Number
Looking for a 910 phone number? Several major telecommunication carriers offer services within area codes 910 and 472, including AT&T, Verizon, T-Mobile, and numerous smaller regional providers. These carriers provide mobile and landline phone service, internet connectivity, and business telecommunications solutions. You can also get a local phone number through VoIP providers for business or personal use.
Choosing a provider: Consider these factors when selecting a telecommunications provider:
Number portability: Under FCC rules, you can keep your existing 910 or 472 phone number when switching providers (called "local number portability"). Contact your new provider to initiate the transfer; the process typically takes 1 – 7 business days for wireless numbers and 3 – 10 business days for landlines.
Frequently Asked Questions About Area Code 910
Here are common questions about area codes 910 and 472:
What cities are in the 910 area code? The 910 area code serves southeastern North Carolina, including Fayetteville, Wilmington, Jacksonville, Lumberton, Southern Pines, Laurinburg, and surrounding communities across 19 counties. The largest city in area code 910 is Fayetteville.
How do I dial a number within area codes 910 and 472? You must dial the full 10-digit number (area code + local number) for all calls, even when calling someone with the same area code.
Who regulates area codes 910 and 472? The North Carolina Utilities Commission (NCUC) handles state-level telecommunications regulation, while the Federal Communications Commission (FCC) oversees national policy and wireless carriers.
Why was area code 472 introduced? North Carolina added the 472 area code as an overlay to 910 to accommodate increasing demand for phone numbers driven by population growth, businesses, mobile devices, and IoT (Internet of Things) devices.
What services are available in area codes 910 and 472? Major carriers (AT&T, Verizon, T-Mobile) and smaller providers offer mobile and landline phone service, VoIP, internet access, business phone systems, and specialized solutions for enterprises.
Can I keep my 910 phone number if I move or change carriers? Yes. Under FCC number portability rules, you can keep your 910/472 number when switching carriers within the same geographic area. Moving outside the 910/472 region may require a new number.
How do I get a new 910 or 472 phone number? Contact any telecommunications provider serving the area. New numbers are assigned from available inventory in either the 910 or 472 area code. You cannot choose which area code you receive, but both work identically.
Do calls between 910 and 472 numbers cost extra? No, calls between 910 and 472 numbers are local calls with no additional charges beyond your normal plan rates.
What time zone is area code 910? The 910/472 area codes are in the Eastern Time Zone (ET): UTC-5 during Standard Time (November – March) and UTC-4 during Daylight Saving Time (March – November).
Conclusion: Everything You Need to Know About Area Code 910
Area code 910 serves as the primary telephone area code for southeastern North Carolina, with area code 472 as its overlay. Understanding the 910 area code location, coverage map, cities served, dialing procedures, and how to get a local 910 phone number is essential for residents, businesses, and anyone communicating with the region.
Your next steps:
Remember to always use 10-digit dialing for all calls within the 910/472 area, and keep emergency numbers like 911 and 988 readily accessible.